{"id":1622,"date":"2025-05-13T15:47:13","date_gmt":"2025-05-13T07:47:13","guid":{"rendered":"http:\/\/113.45.254.23\/?p=1622"},"modified":"2025-05-13T15:47:14","modified_gmt":"2025-05-13T07:47:14","slug":"h3c-4%e5%8f%b0%e4%ba%a4%e6%8d%a2%e6%9c%ba%e5%a0%86%e5%8f%a0","status":"publish","type":"post","link":"http:\/\/113.45.254.23\/?p=1622","title":{"rendered":"H3C 4\u53f0\u4ea4\u6362\u673a\u5806\u53e0"},"content":{"rendered":"\n

\u4e00\u3001\u5b9e\u9a8c\u62d3\u6251\u56fe<\/h2>\n\n\n\n
\"\"<\/div><\/figure>\n\n\n\n

\u4e8c\u3001\u914d\u7f6e\u7b2c\u4e00\u53f0\u4ea4\u6362\u673a<\/h2>\n\n\n\n
<H3C>system-view\nSystem View: return to User View with Ctrl+Z.\n[H3C]undo info-center enable\nInformation center is disabled.\n[H3C]irf member 1 priority Ten\n[H3C]irf member 1 priority 32\n[H3C]interface range Ten\n[H3C]interface range Ten-GigabitEthernet 1\/0\/49 to Ten\n[H3C]interface range Ten-GigabitEthernet 1\/0\/49 to Ten-GigabitEthernet 1\/0\/52\n[H3C-if-range]shutdown\n[H3C-if-range]quit\n[H3C]irf-port 1\/1\n[H3C-irf-port1\/1]port group interface Ten\n[H3C-irf-port1\/1]port group interface Ten-GigabitEthernet 1\/0\/49\nYou must perform the following tasks for a successful IRF setup: \nSave the configuration after completing IRF configuration. \nExecute the \"irf-port-configuration active\" command to activate the IRF ports. \n[H3C-irf-port1\/1]port group interface Ten-GigabitEthernet 1\/0\/51\n[H3C-irf-port1\/1]quit\n[H3C]interface range Ten-GigabitEthernet 1\/0\/49 to Ten-GigabitEthernet 1\/0\/52\n[H3C-if-range]undo shutdown\n[H3C-if-range]quit\n[H3C]save force\nValidating file. Please wait...<\/code><\/pre>\n\n\n\n
\u4e09\u3001\u914d\u7f6e\u7b2c\u4e8c\u53f0\u4ea4\u6362\u673a<\/h2>\n\n\n\n
<H3C>system-view\nSystem View: return to User View with Ctrl+Z.\n[H3C]undo info-center enable\nInformation center is disabled.\n[H3C]irf member 1 renumber 2\nRenumbering the member ID may result in configuration change or loss. Continue?[Y\/N]:y\n[H3C]quit\n<H3C>reboot\nStart to check configuration with next startup configuration file, please wait.........DONE!\nCurrent configuration may be lost after the reboot, save current configuration? [Y\/N]:y\nPlease input the file name(*.cfg)[flash:\/startup.cfg]\n(To leave the existing filename unchanged, press the enter key):\nValidating file. Please wait...\nSaved the current configuration to mainboard device successfully.\nThis command will reboot the device. Continue? [Y\/N]:y\nNow rebooting, please wait...<\/code><\/pre>\n\n\n\n
<H3C>system-view\nSystem View: return to User View with Ctrl+Z.\n[H3C]interface range Ten\n[H3C]interface range Ten-GigabitEthernet 2\/0\/49 to Ten\n[H3C]interface range Ten-GigabitEthernet 2\/0\/49 to Ten-GigabitEthernet 2\/0\/52\n[H3C-if-range]shutdown\n[H3C-if-range]quit\n[H3C]irf-port 2\/1\n[H3C-irf-port2\/1]port group interface Ten\n[H3C-irf-port2\/1]port group interface Ten-GigabitEthernet 2\/0\/50\nYou must perform the following tasks for a successful IRF setup: \nSave the configuration after completing IRF configuration. \nExecute the \"irf-port-configuration active\" command to activate the IRF ports. \n[H3C-irf-port2\/1]port group interface Ten-GigabitEthernet 2\/0\/52\n[H3C-irf-port2\/1]quit\n[H3C]irf-port 2\/2\n[H3C-irf-port2\/2]port group interface Ten\n[H3C-irf-port2\/2]port group interface Ten-GigabitEthernet 2\/0\/49\nYou must perform the following tasks for a successful IRF setup: \nSave the configuration after completing IRF configuration. \nExecute the \"irf-port-configuration active\" command to activate the IRF ports. \n[H3C-irf-port2\/2]port group interface Ten-GigabitEthernet 2\/0\/51\n[H3C-irf-port2\/2]quit\n[H3C]interface range Ten-GigabitEthernet 2\/0\/49 to Ten-GigabitEthernet 2\/0\/52\n[H3C-if-range]undo shutdown\n[H3C-if-range]quit\n[H3C]save force\nValidating file. Please wait...\nSaved the current configuration to mainboard device successfully.\n[H3C]irf-port-configuration active\n[H3C]<\/code><\/pre>\n\n\n\n
\u56db\u3001\u914d\u7f6e\u7b2c\u4e00\u53f0\u4ea4\u6362\u673a<\/h2>\n\n\n\n
[H3C]interface range Ten-GigabitEthernet 1\/0\/49 to Ten-GigabitEthernet 1\/0\/52\n[H3C-if-range]shutdown\n[H3C-if-range]quit\n[H3C]irf-port 1\/2\n[H3C-irf-port1\/2]port group interface Ten-GigabitEthernet 1\/0\/50\nYou must perform the following tasks for a successful IRF setup: \nSave the configuration after completing IRF configuration. \nExecute the \"irf-port-configuration active\" command to activate the IRF ports. \n[H3C-irf-port1\/2]port group interface Ten-GigabitEthernet 1\/0\/52\n[H3C-irf-port1\/2]quit\n[H3C]interface range Ten-GigabitEthernet 1\/0\/49 to Ten-GigabitEthernet 1\/0\/52\n[H3C-if-range]undo shutdown\n[H3C-if-range]quit\n[H3C]save force\nValidating file. Please wait...\nSaved the current configuration to mainboard device successfully.\n[H3C]irf-port-configuration active<\/code><\/pre>\n\n\n\n
\u4e94\u3001\u914d\u7f6e\u7b2c\u4e09\u53f0\u4ea4\u6362\u673a<\/h2>\n\n\n\n
<H3C>system-view\nSystem View: return to User View with Ctrl+Z.\n[H3C]undo info-center enable\nInformation center is disabled.\n[H3C]irf member 1 renumber 3\nRenumbering the member ID may result in configuration change or loss. Continue?[Y\/N]:y\n[H3C]quit\n<H3C>reboot\nStart to check configuration with next startup configuration file, please wait.........DONE!\nCurrent configuration may be lost after the reboot, save current configuration? [Y\/N]:y\nPlease input the file name(*.cfg)[flash:\/startup.cfg]\n(To leave the existing filename unchanged, press the enter key):\nValidating file. Please wait...\nSaved the current configuration to mainboard device successfully.\nThis command will reboot the device. Continue? [Y\/N]:y\nNow rebooting, please wait...<\/code><\/pre>\n\n\n\n
\u516d\u3001\u914d\u7f6e\u7b2c4\u53f0\u4ea4\u6362\u673a<\/h2>\n\n\n\n
<H3C>system-view\nSystem View: return to User View with Ctrl+Z.\n[H3C]undo info-center enable\nInformation center is disabled.\n[H3C]irf member 1 renumber 4\nRenumbering the member ID may result in configuration change or loss. Continue?[Y\/N]:y\n[H3C]quit\n<H3C>reboot\nStart to check configuration with next startup configuration file, please wait.........DONE!\nCurrent configuration may be lost after the reboot, save current configuration? [Y\/N]:y\nPlease input the file name(*.cfg)[flash:\/startup.cfg]\n(To leave the existing filename unchanged, press the enter key):\nValidating file. Please wait...\nSaved the current configuration to mainboard device successfully.\nThis command will reboot the device. Continue? [Y\/N]:y\nNow rebooting, please wait...<\/code><\/pre>\n\n\n\n
\u4e03\u3001\u914d\u7f6e\u7b2c\u4e09\u53f0\u865a\u62df\u673a<\/h2>\n\n\n\n
<H3C>system-view\nSystem View: return to User View with Ctrl+Z.\n[H3C]undo info-center enable\nInformation center is disabled.\n[H3C]interface range ten\n[H3C]interface range Ten-GigabitEthernet 3\/0\/49 to \n[H3C]interface range Ten-GigabitEthernet 3\/0\/49 to t\n[H3C]interface range Ten-GigabitEthernet 3\/0\/49 to Ten-GigabitEthernet 3\/0\/52\n[H3C-if-range]shutdown\n[H3C-if-range]quit\n[H3C]irf-port 3\/2\n[H3C-irf-port3\/2]port group t\n[H3C-irf-port3\/2]port group interface ten\n[H3C-irf-port3\/2]port group interface Ten-GigabitEthernet 3\/0\/49\nYou must perform the following tasks for a successful IRF setup: \nSave the configuration after completing IRF configuration. \nExecute the \"irf-port-configuration active\" command to activate the IRF ports. \n[H3C-irf-port3\/2]port group interface Ten-GigabitEthernet 3\/0\/51\n[H3C-irf-port3\/2]quit\n[H3C]irf-port 3\/1\n[H3C-irf-port3\/1]port group interface tne\n[H3C-irf-port3\/1]port group interface ten\n[H3C-irf-port3\/1]port group interface Ten-GigabitEthernet 3\/0\/50\nYou must perform the following tasks for a successful IRF setup: \nSave the configuration after completing IRF configuration. \nExecute the \"irf-port-configuration active\" command to activate the IRF ports. \n[H3C-irf-port3\/1]port group interface Ten-GigabitEthernet 3\/0\/52\n[H3C-irf-port3\/1]quit\n[H3C]interface range Ten-GigabitEthernet 3\/0\/49 to Ten-GigabitEthernet 3\/0\/52\n[H3C-if-range]undo shutdown\n[H3C-if-range]quit\n[H3C]save force\nValidating file. Please wait...\nSaved the current configuration to mainboard device successfully.\n[H3C]irf-port-configuration active\n[H3C]<\/code><\/pre>\n\n\n\n
\u516b\u3001\u914d\u7f6e\u7b2c\u56db\u53f0\u4ea4\u6362\u673a<\/h2>\n\n\n\n
<H3C>system-view\nSystem View: return to User View with Ctrl+Z.\n[H3C]undo info-center enable\nInformation center is disabled.\n[H3C]interface range ten\n[H3C]interface range Ten-GigabitEthernet 4\/0\/49 to ten\n[H3C]interface range Ten-GigabitEthernet 4\/0\/49 to Ten-GigabitEthernet 4\/0\/52\n[H3C-if-range]shutdown\n[H3C-if-range]quit\n[H3C]irf-port 4\/1\n[H3C-irf-port4\/1]port group interface ten\n[H3C-irf-port4\/1]port group interface Ten-GigabitEthernet 4\/0\/49\nYou must perform the following tasks for a successful IRF setup: \nSave the configuration after completing IRF configuration. \nExecute the \"irf-port-configuration active\" command to activate the IRF ports. \n[H3C-irf-port4\/1]port group interface Ten-GigabitEthernet 4\/0\/51\n[H3C-irf-port4\/1]quit\n[H3C]irf-port 4\/2\n[H3C-irf-port4\/2]port group interface Ten-GigabitEthernet 4\/0\/50\nYou must perform the following tasks for a successful IRF setup: \nSave the configuration after completing IRF configuration. \nExecute the \"irf-port-configuration active\" command to activate the IRF ports. \n[H3C-irf-port4\/2]port group interface Ten-GigabitEthernet 4\/0\/52\n[H3C-irf-port4\/2]quit\n[H3C]interface range Ten-GigabitEthernet 4\/0\/49 to Ten-GigabitEthernet 4\/0\/52\n[H3C-if-range]undo shutdown\n[H3C-if-range]quit\n[H3C]save force\nValidating file. Please wait...\nSaved the current configuration to mainboard device successfully.\n[H3C]irf-port-configuration active\n[H3C]Cryptographic Algorithms Known-Answer Tests are running ...<\/code><\/pre>\n\n\n\n
\u4e5d\u3001\u7b2c\u4e00\u53f0\u4ea4\u6362\u673a\u4e0a\u521b\u5efavlan<\/h2>\n\n\n\n
<H3C>system-view\nSystem View: return to User View with Ctrl+Z.\n[H3C]vlan 10\n[H3C-vlan10]vlan 20\n[H3C-vlan20]vlan 30\n[H3C-vlan30]vlan 40\n[H3C-vlan40]sysname IRF-SW\n[IRF-SW]<\/code><\/pre>\n\n\n\n
\u5341\u3001\u9a8c\u8bc1<\/p>\n\n\n\n
\"\"<\/div><\/figure>\n\n\n\n
\"\"<\/div><\/figure>\n","protected":false},"excerpt":{"rendered":"
\u4e00\u3001\u5b9e\u9a8c\u62d3\u6251\u56fe \u4e8c\u3001\u914d\u7f6e\u7b2c\u4e00\u53f0\u4ea4\u6362\u673a \u4e09\u3001\u914d\u7f6e\u7b2c\u4e8c\u53f0\u4ea4\u6362\u673a \u56db\u3001\u914d\u7f6e\u7b2c\u4e00\u53f0\u4ea4\u6362\u673a \u4e94\u3001\u914d\u7f6e\u7b2c\u4e09\u53f0\u4ea4\u6362\u673a \u516d\u3001\u914d […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[96],"tags":[106],"class_list":["post-1622","post","type-post","status-publish","format-standard","hentry","category-96","tag-106"],"_links":{"self":[{"href":"http:\/\/113.45.254.23\/index.php?rest_route=\/wp\/v2\/posts\/1622","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/113.45.254.23\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/113.45.254.23\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/113.45.254.23\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/113.45.254.23\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1622"}],"version-history":[{"count":3,"href":"http:\/\/113.45.254.23\/index.php?rest_route=\/wp\/v2\/posts\/1622\/revisions"}],"predecessor-version":[{"id":1628,"href":"http:\/\/113.45.254.23\/index.php?rest_route=\/wp\/v2\/posts\/1622\/revisions\/1628"}],"wp:attachment":[{"href":"http:\/\/113.45.254.23\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1622"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/113.45.254.23\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=1622"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/113.45.254.23\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=1622"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}